home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Almathera Ten Pack 3: CDPD 3
/
Almathera Ten on Ten - Disc 3: CDPD3.iso
/
scope
/
051-075
/
scopedisk72
/
tag-25
/
tag_system
< prev
next >
Wrap
Text File
|
1995-03-19
|
7KB
|
174 lines
SYSTEM: C.A.B. from Delaware
LOCAT: c1:BBS/
SYSOP: Chuck Maier
USERS:
ACCOUNTS: 1500
GUEST:
STSEC:0
BDSEC:0
LBSEC:0
BUSEC:0
TIME:1200
NEW:
STSEC:1
BDSEC:1
LBSEC:1
BUSEC:1
TIME:1840
VALID:
STSEC:2
BDSEC:2
LBSEC:2
BUSEC:2
TIME:3200
the parameter 'express' (below under mail) is to
allow express-mail. a '1' allows. a '0'disallows.
a '2' makes all mail get express'ed.
MAIL:
LOCAT: c2:bbs/mail/
WRITE: 1,255
LETTERS: 200
EXPRESS:2
MODEM:
OPEN: ATE0M0Q0X1V1S0=0S2=255S10=99S12=2&D2
RESET: ATH0
RING: RING
ANSWER: ATA
300:CONNECT
1200:CONNECT 1200
2400:CONNECT 2400
4800:not available
9600:not available
the following parameter 'busyout' is a new
parameter for rev 2.14 and above. it is used
to specify a string to busy-out your bbs phone..
1. while you are in local mode ('$' or'space')
2. when you hit 'b' while board idle
BUSYOUT: ATH1
the 'trivia' parameter below sets the maximum
number of questions. this number of entries is
setup in the keys during a 'generate' session!
TRIVIA:500
the 'chatcon' entry below is for the chat mode.
after the parameter is the actual number of
coded keys. from here on, until all keys are
assigned, must follow with...
kv: a key number
kd: encoded data
the keys are coded by number a=1 z=26.
they can be put in the list in any order
but only 15 keys can be coded!! When in chat
mode... the key is invoked by hitting it while
holding down the control <ctrl> key. The data
encoded contents will be substituted for this
keystroke.
there are several keys that you cannot
assign as they are already set in TAG...
'g' is the bell char (by ascii normal convention)
'e' calls online account edit
keep in mind... the maximum length of each
key (in its decoded form) is 80 characters. a
newline (&) decodes to 2 characters!!
you can not code any control characters with
with this method so a few are provided. don't
forget the newline at the end if you want one!
& = newline ^ = bell ~ = escape(HEX 1B)
abcdefghijklmnopqrstuvwxyz
12345678901234567890123456
CHATCON:6
a KV:1
DV:&& {?} <-- Big guy&( V-)&"|Y|"& |||&== == Hi.. Chuck here!!&&
s KV:19
DV:^:)&&
i KV:9
DV:&Hello.. ^Chuck here&&
d KV:4
DV:&Just what the heck do you think!?!?&&&
g KV:7
DV:^^^
w KV:23
DV:&Chuck sez: //\&Welcome to //\\\&Chuck's \\//===\\&TAG BBS \/ \\\
the following parameter is for clock
correction. for whatever reason.. the
amiga software clock does not keep true
and correct time. My amiga 500 loses about 5
minutes / day. this parameter will be
executed via a cli call at the
'change-of-day' time (midnight) to cause
your system to correct its 'time' to match the
hardware clock. if your machine supports any form
of hardware clock set.. place the call to this
routine in the parameter... otherwise set the
parameter to nothing and it will not be performed!
CLOCKSTRING: c:setclock opt load
the following parameter will limit the # of times
that a user may 'ring-your-chime' for a chat per
visit. it will not limit his requesting a chat and
his request will still be registered in the
menu-bars during his visit. the # following the
parameter is the number of times he is allowed to
bong-you!! The screen 'flash' will still be
enabled!!
BONGPERVISIT: 2
the following parameter will control the minimum
level that a user must be to hit the chat. i
suggest you set this to (at least) a level 1.
that way you will be sure you, at least, know
their name. also.. a '-1' will effectively disable
this parameter's effects!!
CHATLEVEL: 1
The following parameter will cause the bbs to shut
down at the local time specified. a user online
will get warnings that the bbs is going off the
air and he will be disconnected and the bbs shut
down at that time. there are a couple of
limitations.... as the time can only be set from
0030 to 2350!! there are several reasons that this
has to be. along with the 'clock-slowdown'...too
much happens behind the scenes in the bbs software
at midnight to have to shut the bbs down also!!
to disable this feature... put a '0'!!
TIMESHUTDOWN: 0
The following parameter is the # of times the BBS
software will try and reset the modem at hangup.
Some modems require a little more TLC (tender
loving care) than others. You can set this to aNY
value you wish EXCEPT ZERO!!! It defaults to 3 if
the entire parameter is missing.
MODEMWACKS: 6
the following parameter will be displayed at
join-time when asking for the user's board name.
some sysops have suggested that it be the user's
first initial and last name. prompt it here..
maximum of 60 characters!!
BNAMEPROMPT: Enter your ALIAS(max 14 chars)!